HP Designjet L28500 HP Designjet L28500 Printer Series - User's guide - Page 103
Do not use commercial cleaners or abrasive cleaners. Do not wet the platen directly
View all HP Designjet L28500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
5. With the same dry brush, remove dry, loosened ink deposits from the platen surface. 6. Slightly dampen the used cloth with 95% ethanol to wipe the remaining dry ink deposits from the platen. NOTE: 95% ethanol is not provided in the User Maintenance Kit. CAUTION: Ethanol is highly flammable. Observe the manufacturer's safety precautions. CAUTION: Do not use commercial cleaners or abrasive cleaners. Do not wet the platen directly, because you will leave too much moisture behind, which could damage the substrate advance sensor. 7. Use the damp cloth to remove remaining dry ink deposits from the cutter ramp. ENWW Clean the platen 97
5.
With the same dry brush, remove dry, loosened ink deposits from the platen surface.
6.
Slightly dampen the used cloth with 95% ethanol to wipe the remaining dry ink deposits from the
platen.
NOTE:
95% ethanol is not provided in the User Maintenance Kit.
CAUTION:
Ethanol is highly flammable. Observe the manufacturer’s safety precautions.
CAUTION:
Do not use commercial cleaners or abrasive cleaners. Do not wet the platen directly,
because you will leave too much moisture behind, which could damage the substrate advance
sensor.
7.
Use the damp cloth to remove remaining dry ink deposits from the cutter ramp.
ENWW
Clean the platen
97