HP Designjet L28500 HP Designjet L28500 Printer Series - User's guide - Page 139
Lack of sharpness, Black areas look hazy
View all HP Designjet L28500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
● Use your RIP to add lateral color bars on the side of the plot that is close to the ink supplies. The color bars are designed to exercise all the printhead nozzles, to prevent the problem from occurring. NOTE: Not all RIPs provide this option. ● Add lateral color bars to the image, manually, before printing. In this case, you can either use the standard colors, or decide to include a particular color in which you have noticed the problem. The recommended width of each color bar is 3 mm. Lack of sharpness If text, lines or solid areas are rough or blurred, the printheads may be misaligned. This is likely if you have not aligned the printheads for a long time, or if there has been a substrate jam. Align the printheads if necessary (see Align the printheads on page 88). You can check whether it is necessary by using the printhead status plot (see Use the printhead status plot on page 126). Black areas look hazy If black areas look hazy or not sufficiently black, try these suggestions. ● Increase the number of passes. ● Laminate the print. ● See Color reproduction tricks on page 70. ENWW Lack of sharpness 133