HP Designjet L28500 HP Designjet L28500 Printer Series - User's guide - Page 51
Unload a roll from the take-up reel, Substrate, Enable take-up reel
View all HP Designjet L28500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Unload a roll from the take-up reel 1. On the printer's front panel, press , then , then Substrate > Enable take-up reel. The printer advances the substrate to allow for cutting. 2. Switch the winding-direction switch to the off position. The switch is in the off position when it is centered (in other words, when the switch is neither in position 1 nor position 2). 3. Raise the tension bar to its upper position. 4. Use the advance button on the take-up reel motor to wind the excess substrate around the take-up reel. 5. Press the OK button on the front panel. The printer asks you to cut the substrate manually. 6. Use the advance button on the take-up reel motor to wind the remainder of the substrate around the take-up reel. ENWW The take-up reel 45