HP Designjet L28500 HP Designjet L28500 Printer Series - User's guide - Page 75

Color profiles

Get HP Designjet L28500 PDF manuals and user guides View all HP Designjet L28500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 75 highlights

Color calibration with the Embedded Spectrophotometer is not recommended for the following substrate types. It may be possible to calibrate some of these substrates by using an external color measurement device. ● Non-opaque substrates such as clear film, backlit substrates, and some textiles. ● Substrates with an uneven surface, such as perforated vinyl or punched-window substrates. ● Substrates that suffer deformation from drying and curing, such as paper-based substrates. ● Very elastic substrates, such as some textiles without liner. Substrates suitable for color calibration include even-surfaced adhesive vinyls (neither punched nor perforated), PVC banners and some opaque, stiff textiles. Some textiles require the take-up reel for successful printing. However, the take-up reel may fail to cope with the backward movement of the substrate between the printing and scanning phases of color calibration. To avoid this problem, proceed as follows. 1. Ensure that the take-up reel is enabled. 2. Advance the substrate until the tension bar reaches its lowest position. 3. Manually rewind the take-up reel, using the buttons on the take-up reel motor, to collect the substrate and raise the tension bar until it almost touches the take-up reel. 4. Set the take-up reel's winding direction to neutral. 5. Launch color calibration from the RIP. 6. When the color calibration has finished, you can re-enable the take-up reel. Color profiles Color calibration provides consistent colors, but consistent colors are not necessarily accurate. For instance, if your printer prints all colors as black, its colors may be consistent but they are not accurate. In order to print accurate colors, it is necessary to convert the color values in your files to the color values that will produce the correct colors from your printer, your inks and your substrate. A color profile is a description of a printer, ink and substrate combination that contains all the information needed for these color conversions. NOTE: Although color profiles obtained in one particular print mode can be reused when printing with other print modes, the most accurate color reproduction can only be achieved if profiling is made with exactly the same print mode that is used for printing. For example, if you use a color profile obtained with a 10-pass STANDARD print mode, you may see some color difference when you use it to print with an 8-pass SPEED print mode These color conversions are performed by your Raster Image Processor (RIP), not by the printer. For further information on the use of color profiles, see the documentation for your application software and for your RIP. In addition to the color profiles used for printing, you may wish to calibrate and profile your monitor (display device), so that the colors you see on the screen relate more closely to those that you see on your prints. ENWW Color profiles 69

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
Color calibration with the Embedded Spectrophotometer is not recommended for the following substrate
types. It may be possible to calibrate some of these substrates by using an external color measurement
device.
●
Non-opaque substrates such as clear film, backlit substrates, and some textiles.
●
Substrates with an uneven surface, such as perforated vinyl or punched-window substrates.
●
Substrates that suffer deformation from drying and curing, such as paper-based substrates.
●
Very elastic substrates, such as some textiles without liner.
Substrates suitable for color calibration include even-surfaced adhesive vinyls (neither punched nor
perforated), PVC banners and some opaque, stiff textiles.
Some textiles require the take-up reel for successful printing. However, the take-up reel may fail to cope
with the backward movement of the substrate between the printing and scanning phases of color
calibration. To avoid this problem, proceed as follows.
1.
Ensure that the take-up reel is enabled.
2.
Advance the substrate until the tension bar reaches its lowest position.
3.
Manually rewind the take-up reel, using the buttons on the take-up reel motor, to collect the
substrate and raise the tension bar until it almost touches the take-up reel.
4.
Set the take-up reel's winding direction to neutral.
5.
Launch color calibration from the RIP.
6.
When the color calibration has finished, you can re-enable the take-up reel.
Color profiles
Color calibration provides consistent colors, but consistent colors are not necessarily accurate. For
instance, if your printer prints all colors as black, its colors may be consistent but they are not accurate.
In order to print accurate colors, it is necessary to convert the color values in your files to the color
values that will produce the correct colors from your printer, your inks and your substrate. A color
profile is a description of a printer, ink and substrate combination that contains all the information
needed for these color conversions.
NOTE:
Although color profiles obtained in one particular print mode can be reused when printing
with other print modes, the most accurate color reproduction can only be achieved if profiling is made
with exactly the same print mode that is used for printing. For example, if you use a color profile
obtained with a 10-pass STANDARD print mode, you may see some color difference when you use it to
print with an 8-pass SPEED print mode
These color conversions are performed by your Raster Image Processor (RIP), not by the printer. For
further information on the use of color profiles, see the documentation for your application software and
for your RIP.
In addition to the color profiles used for printing, you may wish to calibrate and profile your monitor
(display device), so that the colors you see on the screen relate more closely to those that you see on
your prints.
ENWW
Color profiles
69