Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 136

COPIER Selecting single color copying When [Single Color] is selected for the color mode, the following screen appears. Touch the desired color and touch the [OK] key. Color Mode OK Single Color OK R(Red) C(Cyan) G(Green) M(Magenta) B(Blue) Y(Yellow) Selecting 2 color copying When [2 Color] is selected for the color mode, the following screen appears. Touch the desired color and touch the [OK] key. Color Mode OK 2 Color OK Select a color other than black. R(Red) C(Cyan) G(Green) M(Magenta) B(Blue) Y(Yellow) • When auto mode is used, there may be some originals for which switching between color and black & white does not take place correctly. In this event, press the [COLOR START] key or the [BLACK & WHITE START] key as appropriate to manually switch between color and black & white. • Copying takes place in black & white when the [BLACK & WHITE START] key is pressed, regardless of the color mode setting. System Settings (Administrator): Initial Status Settings (Color Mode) This is used to change the default color mode setting. System Settings (Administrator): Detect Standard in Auto Color Mode When the color mode is set to auto, the discrimination point for detecting whether originals are color or black and white can be set to one of 5 levels. 2-22 Contents