Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 735

SYSTEM SETTINGS Disabling of Color Mode (When a color-related problem has occurred.) When a color-related problem has occurred and printing is not possible, the use of color mode can be temporarily prohibited. Black & white printing will still be allowed. This function is only for use as an emergency measure. Once this setting is enabled, only a service technician can cancel the setting. Promptly contact your dealer or nearest SHARP service department to have a service technician cancel the setting and resolve the color-related problem. Disabling of Master Machine Mode This prohibits the use of the machine as a master machine for tandem printing. (Normally this setting is not necessary.) Disabling of Slave Machine Mode This prohibits the use of the machine as a slave machine for tandem printing. (Normally this setting is not necessary.) Copy Function Settings Disabling Deletion of Job Programs This is used to prohibit the deletion and changing of copy settings stored in job programs. Disabling of Bypass-Tray in Duplex Copy This is used to prohibit the use of the bypass tray when making two-sided copies. The bypass tray is often used to feed label sheets, transparency film, and other special media for which two-sided copying is prohibited. If a sheet of one of these special media enters the reversing unit, a misfeed or damage to the unit may result. If special media for which two-sided copying is prohibited is often used, it is recommended that you enable this setting. Disabling of Auto Paper Selection This setting is used to disable the Auto Paper Selection function. When this setting is enabled, automatic selection of paper that is the same size as the original on the document glass or in the automatic document feeder does not take place. Printer Settings Prohibit Notice Page Printing This setting is used to disable printing of notice pages. Prohibit Test Page Printing This setting is used to disable printing of test pages. When this setting is enabled, "Printer Test Page" in the system settings cannot be used to print test pages. Exclude Bypass-Tray from Auto Paper Select When [Auto] is selected for paper type selection, the bypass tray can be excluded from the trays that can be selected. This is recommended when special paper is often placed in the bypass tray. Image Send Settings Other Disabling Disable Switching of Display Order This is used to prohibit changes to the order of display (search number order, ascending, descending) in the address book. When this setting is enabled, touching a tab on the address book screen does not change the order. The currently selected display order will be the order that is used after the setting is selected. Disable Scan Function This is used to disable PC scan and USB memory scan. When these modes are disabled, they are grayed out when the mode is changed in the base screen. Settings to Disable Registration Disable Registering Destination from Operation Panel This disables address control from the machine. Configure the setting for each of the following items: • Group (Direct Entry) • Group (Address Book) • Individual Select All: Select all items. Clear Checked: Clear all selections. 7-89 Contents