Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 617

PERFORMING "Scan to HDD" DOCUMENT FILING Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 1 1 2 (4) (2) (1) (3) COPY IMAGE SEND Ready to scan to HDD. Press [Start] to scan original. DOCUMENT FILING File Retrieve Scan to HDD HDD Status Ex Data Access File Information Original Scan: Auto 8½x11 Store: Exposure Auto Resolution 200X200dpi Comp. Ratio Medium Color Mode Auto Mono2 Special Modes Auto Switch to document filing mode and select Scan to HDD settings. (1) Touch the [DOCUMENT FILING] key. (2) Touch the [Scan to HDD] tab. If you do not wish to select settings, go to the next step. (3) Select the original size, exposure, resolution, compression ratio, color mode, and special modes. See ""Scan to HDD" SCREEN" (page 6-18). (4) Touch the [File Information] key. The settings are the same as for "File". See "FILE INFORMATION" (page 6-15). If the original is 2-sided, be sure to touch the [Original] key and then touch the [2-Sided Booklet] key or the [2-Sided Tablet] key as appropriate for the original. Press the [COLOR START] key or the [BLACK & WHITE START] key . Scanning begins. For the procedure for placing the original, see step 4 of "SAVING A FILE WITH "Quick File"" (page 6-11). 3 A beep will sound to indicate that Scan to HDD is completed. To cancel scanning... Press the [STOP] key ( ). When Scan to HDD is performed without appending file information, the following user name and file name are automatically assigned to the file. User Name: User Unknown File Name: Mode_Month-Day-Year_Hour-Minute-Second (Example: HDD_04042010_112030AM) Stored to: Main Folder When user authentication is used, the user name that was used for login is automatically selected. 6-22 Contents