Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 85
Finisher Maintenance
View all Sharp MX-2600N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
BEFORE USING THE MACHINE FINISHER MAINTENANCE When the staple cartridge runs out of staples, a message will appear in the operation panel. Follow the procedure below to replace the staple cartridge. Replacing the staple cartridge Open the cover. 1 While pressing the lever over to the left, slide the finisher to the left until it stops. 2 Gently slide the finisher until it stops. Lower the staple case release lever and remove the staple case. 3 Pull the staple case out to the right. Remove the empty staple cartridge from the staple case. 4 Insert a new staple cartridge into the staple case as shown. 5 Push the staple cartridge in until it clicks into place. 1-44 Contents
1-44
BEFORE USING THE MACHINE
Contents
FINISHER MAINTENANCE
When the staple cartridge runs out of staples, a message will appear in the operation panel. Follow the procedure below
to replace the staple cartridge.
Replacing the staple cartridge
1
Open the cover.
2
While pressing the lever over to the left,
slide the finisher to the left until it stops.
Gently slide the finisher until it stops.
3
Lower the staple case release lever and
remove the staple case.
Pull the staple case out to the right.
4
Remove the empty staple cartridge from
the staple case.
5
Insert a new staple cartridge into the
staple case as shown.
Push the staple cartridge in until it clicks into place.