Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 184

COPIER ADDING INSERTS WHEN COPYING ON TRANSPARENCY FILM (Transparency Inserts) When copying on transparency film, the sheets may stick together due to static electricity. The transparency inserts function can be used to automatically insert a sheet of paper between each sheet of transparency film, making the sheets easy to handle. It is also possible to copy on the inserts. AB C Inserts Place the transparency film in the bypass tray. • Transparency film can only be placed in the bypass tray. Oriented Oriented • Place the transparency film face down on the bypass tray. 1 horizontally vertically When placing the transparency film, the rounded corner of the film should be: - At the front and left if the film is oriented horizontally. - At the back and left if the film is oriented vertically. • After loading the transparency film, configure the bypass tray settings as explained in "MAKING COPIES USING THE BYPASS TRAY" (page 2-39). 2 Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Select the special modes. 3 (1) Touch the [Special Modes] key. (2) Touch the [Transparency Inserts] key. ☞ Special modes menu (1st screen) (page 2-42) 2-70 Contents