Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 87

BEFORE USING THE MACHINE SADDLE STITCH FINISHER This includes the offset function that offsets each set of output from the previous set, the staple sort function that staples each set of output, the saddle stitch function that automatically staples and folds output, and the fold function that folds output in half. An optional hole punching unit can also be installed to punch holes in output. PART NAMES (1) (5) (2) (3) (6) (4) (1) Stapler compiler This temporarily stacks paper to be stapled. (2) Output tray Stapled and offset output is delivered to this tray. The tray is slidable. Extend the tray for large output (12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 13", A3W, A3 and B4 sizes). (3) Side cover Open this cover to replace the staple cartridge or remove a staple jam. (4) Saddle stitch tray Stapled and folded output is delivered to this tray. (5) Top cover Open this cover to remove a paper misfeed. (6) Front cover Open this to replace the staple cartridge, remove jammed staples, or remove misfed paper. • A paper pass unit is required to install a saddle stitch finisher. • Do not place heavy objects on the saddle stitch finisher or press down on the saddle stitch finisher. • Use caution when you turn on the power and when printing is taking place, as the tray may move up and down. • A saddle stitch finisher and a finisher cannot be installed simultaneously. SUPPLIES The saddle stitch finisher requires the following staple cartridge: Finisher unit Saddle stitch unit Staple cartridge (approx. 5000 staples per cartridge x 3 Staple cartridge (approx. 2000 staples per cartridge x 3 cartridges) MX-SCX1 cartridges) AR-SC3 1-46 Contents