Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 80

BEFORE USING THE MACHINE PLACING THE ORIGINAL ON THE DOCUMENT GLASS This section explains how to place the original on the document glass. Allowed original sizes Maximum original size Standard sizes 11" (height) x 17" (width) A3: 297 mm (height) x 420 mm (width) Non-standard sizes 11-5/8" (height) x 17" (width) 297 mm (height) x 432 mm (width) When the original is a non-standard size, see the appropriate explanation below for the mode you are using. ☞ 2. COPIER "SPECIFYING THE ORIGINAL SIZE" (page 2-29) ☞ 4. FACSIMILE "IMAGE SETTINGS" (page 4-45) ☞ 5. SCANNER / INTERNET FAX "IMAGE SETTINGS" (page 5-50) Open the automatic document feeder. 1 Original size detector Place the original. Place the original face down in the far left corner of the document glass. Document glass scale mark Document glass scale mark 5-1/2" x 8-1/2" (A5) B5R 8-1/2" x 11"R (A4R) B5 8-1/2" x 14" (B4) 2 8-1/2" x 11" (A4) 11" x 17" (A3) The original should always be placed in the far left corner, regardless of its size. Align the top left corner of the original with the tip of the mark. Do not place any objects under the original size detector. Closing the automatic document feeder with an object underneath may damage the original size detector and prevent correct detection of the original size. If you are placing a small non-standard size original on the document glass, it is convenient to place a blank sheet of 8-1/2" x 11" or 5-1/2" x 8-1/2" (A4 or B5) paper on top of the original to facilitate detection of the original size. 1-39 Contents