Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 227

COPIER REVERSING WHITE AND BLACK IN A COPY (B/W Reverse) This is used to reverse black and white in a copy to create a negative image. This function can only be used for black and white copying. Originals with large black areas (which use a large amount of toner) can be copied using Black/White Reverse to reduce toner consumption. Originals B/W Reverse copy 1 Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Select the special modes. (1) Touch the [Special Modes] key. 2 (2) Touch the keys to switch through the screens. (3) Touch the [Image Edit] key. ☞ [Image Edit] KEY (page 2-102) (1) (2) Special Modes OK Image Edit OK 3 Photo Repeat 11x17 Full Bleed Multi-Page Enlargement Centering Mirror Image B/W Reverse Select B/W Reverse. (1) Touch the [B/W Reverse] key so that it is highlighted. (2) Touch the [OK] key. You will return to the special modes screen. Touch the [OK] key to return to the base screen of copy mode. Press the [BLACK & WHITE START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [BLACK & WHITE START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. 4 When using this function, the [COLOR START] key cannot be used. To cancel scanning and copying... Press the [STOP] key ( ). 2-113 Contents