Sharp MX-M450N Operation Manual - Page 42

LOADING PAPER ■ Loading transparency film Be sure to load the transparency film with the white label side up. Make sure no image will be printed on the label. Printing on the label may cause smudges on prints. Transparency film must be set in the portrait orientation. Specifications (multi purpose drawer) Name Multi purpose drawer Paper size/weight See specifications of paper trays on page 2-3. Paper capacity 500 sheets (20 lbs. (80 g/m2 )) of paper, 40 envelopes, 40 postcards, 40 sheets of transparency film Dimensions 25-3/4" (W) x 22-21/64" (D) x 5-43/64" (H) (654 mm (W) x 567 mm (D) x 144 mm (H)) Weight Approximately 24.3 lbs. or 11 kg Specifications are subject to change for improvement without notice. Loading paper in the stand/3 x 500 sheet paper drawer Upper paper tray: The upper tray is the same as the multi-purpose drawer. Use the upper tray according to the instructions for the multi-purpose drawer on page 2-8. Middle and lower paper trays: Up to 500 sheets of SHARP recommended plain paper can be loaded in these trays. The method of loading paper is the same as for paper tray 1 in the main unit. See the description (page 2-2). NOTE If the paper size or paper type is changed in either paper tray, the tray settings must be changed in system settings. Refer to "Setting the paper type and paper size" on page 2-5. Specifications (stand/3 x 500 sheet paper drawer) Name Paper size/weight Paper capacity (ordinary paper) Dimensions Weight Stand/3 x 500 sheet paper drawer See specifications of paper trays on page 2-3. 500 sheets (20 lbs. (80 g/m2 )) each 23-3/16" (W) x 24-51/64" (D) x 15-29/32" (H) (589 mm (W) x 630 mm (D) x 404 mm (H)) Approximately 70.6 lbs. or 32.9 kg 2-10