Sharp MX-M450N Operation Manual - Page 84

APPLICATION COMMUNICATION MODULE (MX-AMX2) ■ Selecting the standard application from document filing mode The [Sharp OSA] key appears in the upper right-hand corner of the document filing screen. Follow the steps below to select a standard application. 1 Touch the [Sharp OSA] key. SharpOSA FILE RETRIEVE FILE FOLER QUICK FILE FOLDER If no standard applications have been stored in the Web pages, the key cannot be touched. 2 Select the standard application. App 01 If one or more standard applications have been App 02 stored in the Web pages, App 03 the screen to select the App 04 standard application will appear. Touch the standard application that you wish to use. If only one standard application has been stored in the Web pages, connection to the standard application will begin. 3 The machine connects to the standard application. The message "Connecting to the external application." appears while the machine communicates with the standard application. Operation in OSA mode When the application communication module is installed, it is possible to check the job log of OSA scan mode in the job status screen. The procedure for displaying the job log is the same as for regular Scan to FTP. To display the job log of OSA scan mode, touch the [SCAN] key once again while the job log of scan mode appears in the job status screen. (When this is done, the name of the key will change to [OSA SCAN].) To return to the scan screen from the OSA scan screen, touch the [OSA SCAN] key. 3-26