Sharp MX-M450N Operation Manual - Page 79

SADDLE STITCH FINISHER 9 Turn roller rotating knob A in the direction of the arrow to move the staple unit to the front. Turn the roller rotating knob until the triangle mark is aligned with the index. Roller rotating knob A Staple unit 10Remove the staple box. 12Return the lever to its original position. 13Reinstall the staple box. Push the staple box in until it clicks into place. 3 11Raise the lever at the end of the staple box. Remove the top staple if it is bent. If bent staples remain, a staple jam will occur again. ■ Disposal of hole punch scrap 1 Unlatch the saddle stitch finisher and slide it away from the machine. 14Push the stapler section back into the finisher. 15Close the front cover. 16Push the saddle stitch finisher back against the machine. NOTE Make a test print or copy in the staple sort mode to ensure that stapling is performed properly. 3 Return the punch scrap collecting container to its original position. 2 Pull out the punch scrap collecting container and empty it. Empty the punch debris into a plastic bag or other container for disposal, taking care not to spill any of the punch debris. 4 Push the saddle stitch finisher back against the machine. 3-21