Sharp MX-M450N Operation Manual - Page 73
Supplies, Saddle stitch finisher functions, Sort mode, Offset mode, Group mode
View all Sharp MX-M450N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
SADDLE STITCH FINISHER Stapling capacity Staples Power supply Dimensions Weight 8-1/2" x 11" or A4 or smaller size: 50 sheets*(20 lbs. or 80 g/m2) 8-1/2" x 14" or B4 or larger size: 25 sheets*(20 lbs. or 80 g/m2) *Up to two sheets of 34 lbs. or 128 g/m2 paper can be included as covers. Upper tray: Single staple can be placed in the top left or lower left corners or two staples can be centered on the left side. Lower tray: 4-47/64" (120 mm) pitch from the center of paper Supplied from machine 29-41/64"* (W) x 23-3/4" (D) x 37-33/64" (H) (753 mm* (W) x 603 mm (D) x 953 mm (H)) *When the top tray is extended. Approx. 86 lbs. (39 kg) Name Punch module Paper sizes for hole 3 holes: 11" x 17", 8-1/2" x 11", A3, A4 punching 2 holes: 8-1/2" x 14", 8-1/2" x 11"R Specifications are subject to change for improvement without notice. 3 Supplies AR-SC2 staple cartridges must be used for this finisher. The cartridge package contains three cartridges approx. 5000 staples each. Saddle stitch finisher functions ■ Sort mode Sorted sets will be delivered. ■ Group mode Groups of copies of the same page will be delivered. Original Printouts Original Printouts ■ Offset mode Offset mode Non-offset mode Sets will move from side to side so that each set or group will be offset from the previous set or group for easy separation. The offset function can only be used in the offset tray. Stapled sets will not be offset. 3-15