Canon MultiPASS C3500 User guide for the MPC3000. - Page 165
Error Correction ECM, Auto Start Send, Transmit Terminal Identification TTI. It can be printed either
View all Canon MultiPASS C3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
r Error Correction (ECM) You select this option to reduce system and line errors when sending a fax. With this option selected, the system checks each outgoing fax for lost data. If data has been lost from a portion of a page, the system transmits that portion again after confirming that all data within that portion can be transmitted successfully. r Auto Start Send When you select this option, the MultiPASS C3000 starts scanning automatically five or ten seconds after you enter a phone number. When you dont select this option, you must press START/COPY to scan the document, or the unit returns to standby mode after 60 seconds. r Off Hook Alarm You select this option to turn on the alarm if the telephones handset is off hook. r Image You select a contrast setting that determines the level of contrast in the faxes you send. The Standard setting is usually appropriate for most documents. However, based on the lightness or darkness of your original fax document, you may prefer to lighten or darken the contrast for the fax transmission. r Fax Heading You select the position where you want the sent fax heading information (your fax number, your name, and date and time) to print on the faxes you send. This information is known as the Transmit Terminal Identification (TTI). It can be printed either inside or outside the image area of your fax page. r On Error You select Resend option if you want the MultiPASS C3000 to automatically redial when an error occurs while sending a fax. You also select which pages are to be resent: only the page on which the error occurred, the page on which the error occurred and the first page of the fax, or all pages. 8-6 Setup and Other Utilities in the Desktop Manager Chapter 8