Canon MultiPASS C3500 User guide for the MPC3000. - Page 86

3 Press START/COPY. START/COPY The MultiPASS C3000 begins scanning the document, and dials the number. SCANNING r After a moment, the display shows the transaction number for the fax. This is a unique number the MultiPASS C3000 assigns to the document and uses to identify the document in transaction reports: SCANNING TRANSMIT Sending Faxes Chapter 4 TX/RX NO. XXXX The display continues to show these three displays in order while the fax is being sent. r The MultiPASS C3000 beeps once to indicate that the document has been sent successfully. TRANSMITTING OK The MultiPASS C3000 automatically redials if the receiving fax does not answer, if the line is busy, or if a transmission error occurs. You can specify the number of times it redials using the Automatic Retries option in the Send Fax dialog box of the MultiPASS Desktop Manager (see page 8-4). If all redial attempts fail, the MultiPASS C3000 beeps intermittently for a few seconds. If this happens, check the fax number and try sending the fax again. If the ALARM light is flashing, correct the error described in the LCD display, and then press STOP. You may need to open the operator panel to remove the document from the ADF (see page 10-3). Sending Faxes With the MultiPASS C3000 4-3