Canon MultiPASS C3500 User guide for the MPC3000. - Page 60
Fabric Sheet FS-101, Printing On a Fabric Sheet
View all Canon MultiPASS C3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Printing Fabric Sheet FS-101 Fabric Sheet FS-101 for Canon printers comes with a booklet that describes special handling procedures. Be sure to look through this booklet for special information regarding the Fabric Sheet. This section describes specific steps for using Fabric Sheets with the Canon Bubble Jet products. Be sure to follow these guidelines. OPEN END AT THE TOP r To avoid paper jams, smearing, and other problems, do not open the printers cover during printing. r Do not touch newly printed fabric sheets until the ink is completely dry. This takes about one hour. N r Do not use the fixing agent that comes with the Fabric Sheet FS-101. This agent is NOT needed when printing with the MultiPASS C3000. Printing On a Fabric Sheet 1 Set up the printer. r Make sure the paper thickness lever is to the right position. r Make sure the paper support and paper output tray are extended. Chapter 2 DO NOT TOUCH THE GUIDE RAIL DO NOT TOUCH THE RIBBON CABLE Printing With the MultiPASS C3000 2-35