Canon MultiPASS C3500 User guide for the MPC3000. - Page 209

Message MEMORY FULL PLEASE WAIT MEMORY USED nn% NO ANSWER PLEASE WAIT RECEIVED IN FILE REC’D IN MEMORY STOP KEY PRESSED TALK TX/RX CANCELLED TX/RX NO. nnnn Chapter 10 Error Code — — #005 — — — — — — — Cause Action The MultiPASS is sending or receiving a fax and its memory is full. If sending a fax, the MultiPASS continues to send the fax as memory becomes available. If receiving a fax, the MultiPASS continues to print after the error is cleared (BJ cartridge is replaced or paper is added). Shows the percentage of If you need more space, memory currently in use. print or send any documents in memory. The receiving fax machine does not answer. Make sure you dialed the correct number. Try again later. The MultiPASS is warming up. Wait until the date and time appear in the LCD display, then begin. The computer was off and a document was received in the memory of the MultiPASS. Turn the computer on to upload the file to the Desktop Manager or press FUNCTION then select FILE PRINT from the menu to print the document. The paper or ink ran out, Add paper to the sheet or a paper jam occurred, feeder, change the so the MultiPASS BJ cartridge, or clear received the document the paper jam. Press in memory. STOP to clear the error message. The MultiPASS automatically prints the document stored in memory. You pressed the STOP button to cancel the current operation. Resume operation. The MultiPASS is set for Fax/Tel mode and you are receiving a telephone call. Answer the call. You pressed STOP to Try sending again. cancel the transmission. When the MultiPASS sends or receives a fax, it assigns it a unique identification number. Write the number down if you’ll need it later. Troubleshooting 10-7 Troubleshooting