Canon MultiPASS C3500 User guide for the MPC3000. - Page 181

Disconnecting the MultiPASS C3000 You can disconnect the MultiPASS C3000 if you want to use the parallel port for another purpose. Before disconnecting your unit, be sure to close the MultiPASS Background. 1. Turn off your computer. 2. Unplug your computer from all electrical sources. 3. Unplug the MultiPASS C3000 from all electrical sources. 4. On the back of your computer, remove the cable connector from the parallel printer port. 5. On the MultiPASS C3000, release the wire clips and remove the cable connector from the port. 6. Plug your computer back in to the electrical source. Using MultiPASS Diagnostics If you have difficulties with your MultiPASS software or hardware, you can use the MultiPASS Diagnostics. You use the MultiPASS Diagnostics to verify your MultiPASS software and hardware installation, and identify hardware problems. The MultiPASS Diagnostics produces a report with information you can use to resolve your problem. You can save the report to an ASCII text file on your hard drive. 1. Open the MultiPASS Diagnostics. • For Windows 95: On the Windows desktop, click Start, and then point to Programs. On the Programs menu, click Canon MultiPASS C3000. Then click MultiPASS Diagnostics. • For Windows 3.1: On the Windows desktop, double-click the MultiPASS Diagnostics icon. The MultiPASS Diagnostics displays a message indicating if all tests were performed successfully. Messages appear suggesting solutions for any problems detected. 8-22 Setup and Other Utilities in the Desktop Manager Chapter 8