Canon MultiPASS C3500 User guide for the MPC3000. - Page 249

Registering A process by which you place fax or telephone numbers and names in the MultiPASS’s memory for automatic dialing so that you can save time dialing frequently called destinations. You register numbers using the Address Book in the MultiPASS Desktop Manager. Regular dialing Pressing the individual numeric buttons to dial a fax or telephone number. Remote receiving ID A two-digit code that enables you to manually activate a fax using a telephone that is connected to the MultiPASS. (The default code is 25.) Remote reception Activating a fax by answering a telephone that is connected to the MultiPASS, but that is not located near the unit (such as a cordless phone). You need to dial a remote receiving ID number to start remote reception. Resolution The measurement of a printer’s quality expressed in dots per inch (dpi). Low resolution causes font characters and graphics to have a jagged appearance. Higher resolution means smoother curves and angles as well as a better match to traditional typeface designs. Resolution values are represented by horizontal data and vertical data, for example, 720 × 360 dpi. Rotary pulse A telephone dialing system where a dial is rotated to send pulses to the telephone switching system. When you pulse dial, you hear clicks. When you touch-tone dial, the most common dialing system, you hear tones. RX See Receiving. Sender ID Information printed at the top of a fax (also called TTI or Transmit Terminal ID). This data appears only if the sending fax has been programmed with the information. Sending Sending transmission is also defined as TX or transmit. A fax document that has been scanned by a fax machine and sent over telephone lines, in the form of electrical pulses, to another fax machine is a sending transmission. The MultiPASS C3000 also allows you to send a document directly from your computer (PC faxing). G-8 Glossary