HP 2840 HP Color LaserJet 2820/2830/2840 All-In-One - Software Technical Refer - Page 305
Confirm Set Community name
UPC - 829160742731
View all HP 2840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 305 highlights
The HP Toolbox Figure 6-81 SNMP screen The following options are available on the SNMP screen: ■ Enable SNMP v1 read-write access. Select this option to enable SNMP V1 agents on the printer. Custom community names can be configured to control management access to the printer. ■ Set Community name: Type the SNMP Set Community Name (password) to allow SNMP information to be configured (or written) on the printer. ■ Confirm Set Community name: Retype the SNMP Set Community Name (password) to allow SNMP information to be configured (or written) on the printer. ■ Get Community name: Type the SNMP Get Community Name (password) to allow SNMP information to be read from the printer. ■ Confirm Get Community name: Retype the SNMP Get Community Name (password) to allow SNMP information to be read from the printer. ■ Disable SNMP v1 default Get Community name of "public". Select this option to disable the default Get community name "public". If you select this option, you will need to type values in the Get Community name and Confirm Get Community name fields. ■ Enable SNMP v1 read-only access (uses "public" for the Get Community value). Select this option to enable the SNMP V1 agents on the printer, but limit access to read-only. Write-access is disabled. The default Get Community name "public" is automatically enabled. ■ Disable SNMP v1. Select this option to disable the SNMP V1 agents on the printer, which is recommended for secure environments. If SNMP V1 is disabled, some port monitors or discovery utilities may not operate properly. ENWW Configuration options 281