HP 2840 HP Color LaserJet 2820/2830/2840 All-In-One - Software Technical Refer - Page 321
Windows installation instructions for networked computers
UPC - 829160742731
View all HP 2840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 321 highlights
Software installation for Windows operating systems To connect an HP LaserJet all-in-one product to a network, use the following instructions: 1 Connect the HP Color LaserJet 2820/2830/2840 to the network. 2 Turn on the HP Color LaserJet 2820/2830/2840. NOTE You must complete the power-up sequence in this order or the installer discovery utility fails to recognize the product. It may take a few minutes for the device to obtain a TCP/ IP address. 3 To print a configuration page from the HP Color LaserJet 2820/2830/2840, press MENU. Press the > button until Reports appears on the control panel. Press the ENTER button. Press the > button until Config report appears on the control panel. Press the ENTER button. 4 To complete the product installation, install the HP LaserJet all-in-one software. Use the information from the test pages to specify the network variables during installation. Windows installation instructions for networked computers Each computer that has the HP LaserJet all-in-one software installed can use all of the product features that are available over a network connection except for the Receive faxes to this computer feature. To install the HP LaserJet all-in-one software on networked Windows operating systems, use the following instructions: NOTE You must have administrator privileges (upon start and restart) to install the software on Windows 2000 or Windows XP. 1 Quit all open programs. 2 Insert the HP LaserJet all-in-one software CD into the CD-ROM drive. NOTE If the CD-ROM does not start automatically, click Start, click Run, and then browse to and double-click the HPSETUP.EXE file in the root directory of the CD. 3 Click Install software and follow the onscreen prompts. 4 When the Installer software prompts you to select how the printer will be connected, select Connected via the network, and then click Next. Follow the onscreen instructions. 5 If you are prompted to restart the computer, click Yes. 6 After installation of the software, dialog boxes appear that allow you to print a test page, register your HP Color LaserJet 2820/2830/2840 over the Web, and set up faxes (HP Color LaserJet 2830 and HP Color LaserJet 2840 only). ENWW Installation options 297