Icom IC-R9500 Instruction Manual - Page 100

7 MEMORY OPERATION D Memory bank set [F-6•EDT/BANK] [F-1•Y] [F-2•Z] [F-4•DEF] [EXIT/SET] Main dial Setting bank limit function for memory channel selection, for memory scan can be set in bank set mode or programming bank name. q Select memory list screen as described at previous page. w Push and hold [F-6•EDT/BANK] for 1 sec. to display the memory bank set mode. e Push [F-1•Y] or [F-2•Z] to select the desired item. r Rotate the main dial to set the desired setting. • Push and hold [F-4•DEF] for 1 sec. to select a default value. t Push [EXIT/SET] to return to memory list screen. BANK (Memory Channels) ON Selects the bank limit function for memory channel selection from ON and OFF. (default: ON) BANK (Memory Scan) ON Selects the bank limit function for memory scan from ON and OFF. (default: ON) • Programming bank names [ABC]/[abc] [123]/[Symbol] Keypad [F-1•Ω] [F-2•≈] [F-3•DEL] [F-4•SPACE] Capital letters, small letters, numerals, some symbols and spaces can be used for bank name programming. q Push [F-1•Y] or [F-2•Z] to select the desired memory bank. w Push [F-5•EDIT] to edit memory bank name. • A cursor appears and blinks. e Input the desired character by rotating the main dial or by editing the keypad for number input. • Push [ABC] or [abc] to toggle capital and small letters. • Push [123] or [Symbol] to toggle numerals and symbols. • Push [F-1•Ω] or [F-2•≈] for cursor movement. • Push [F-3•DEL] to delete the selected character. • Push [F-4•SPACE] to input a space. • Using the receiver's keypad, [0]-[9], can also enter numerals. r Push [EXIT/SET] to input and set the name. • The cursor disappears. t Repeat steps q to r to program another memory bank's name, if desired. y Push [EXIT/SET] to return to memory list screen. 7-8