Icom IC-R9500 Instruction Manual - Page 19
Memory Bank Dial [bank]
View all Icom IC-R9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
%1 MONITOR SWITCH [MONI] (pgs. 3-8, 4-4, 4-19) ➥ Push and hold to open the squelch manually. • The [MONI] indicator appears on the display. • While pushing and holding this switch, release any other receiving functions such as the noise blanker or ANF. • While in a duplex operation, monitor the shifted frequency. %2 MAIN DIAL Changes the displayed frequency, selects set mode setting, etc. %3 LOCK SWITCH [LOCK] (p. 9-2) Push to turn the dial lock function ON or OFF. %4 SPEECH SWITCH [SPCH] (p. 9-2) ➥ Push to announce the S-meter indication and the selected readout frequency. ➥ The selected operating mode is also announced when pushed and held for 1 sec. %5 MEMORY DIAL [M-CH] (inner control; p. 7-3) Rotate to select the desired memory channel. • Memory channels can be selected both in VFO and memory modes. %6 MEMORY BANK DIAL [BANK] (outer control; p. 7-3) Rotate to select the desired memory bank. • Memory banks can be selected both in VFO and memory modes. %7 SCAN SPEED CONTROL [SPEED] (inner control; p. 8-18) Rotate to adjust the scan speed. %8 SCAN DELAY CONTROL [DELAY] (outer control; p. 8-18) Rotate to adjust the desired scan delay time. • This setting is effective when "DELAY" is selected for the scan resume condition (%6). • Scan delay time is adjustable between 2 sec. to 20 sec. %9 SCAN RESUME SWITCHES [OFF]/[DELAY]/[∞] (p. 8-17) Push to select a scan resume condition. • The [SCAN RESUME] indicator lights green above the selected switch. ^0 SCAN START SWITCHES (pgs. 8-5, 8-7 to 8-11, 8-13, 8-14) Push to start the desired scan. 1 PANEL DESCRIPTION 1-9