Icom IC-R9500 Instruction Manual - Page 76
AGC function
View all Icom IC-R9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
5 RECEIVE FUNCTIONS ■ AGC function [AGC VR] indicator [AGC] control [AGC VR/OFF] [AGC] The AGC (auto gain control) controls receiver gain to produce a constant audio output level even when the received signal strength varies greatly. The receiver has 3 preset AGC characteristics (time constant: fast, mid, slow) for non-FM, WFM or P25 mode. The FM, WFM or P25 mode AGC time constant is fixed as 'FAST' (0.1 sec.) and AGC time constant cannot be selected. D Selecting the preset value q Select non-FM, WFM or P25 mode. wPush [AGC] several times to select AGC fast (FAST), AGC medium (MID) or AGC slow (SLOW). • Push and hold [AGC VR/OFF] for 1 sec. to turn the AGC function OFF. D Adjusting the AGC time constant q Select non-FM, WFM or P25 mode. w Push [AGC VR/OFF] once or twice to select AGC volume (VR), then rotate [AGC] control to adjust the AGC time constant. • [AGC VR] indicator lights green and "VR" appears in- stead of "FAST," "MID" or "SLOW." D Setting the AGC time constant preset value qSelect the desired mode (not FM, WFM or P25 mode). w Push and hold [AGC] for 1 sec. to enter AGC set mode. e Push [AGC] several times to select FAST time con- • Selectable AGC time constant (unit: sec.) Mode Default Selectable AGC time constant FM 0.1 (FAST) Fixed stant. r Rotate the main dial to set the desired time constant for 'AGC FAST.' • AGC time constant can be set between 0.1 to 8.0 sec. (depends on mode) or turned OFF. • Push and hold [F-4•DEF] for 1 sec. to select a default WFM 0.1 (FAST) Fixed 3.0 (FAST) 0.3, 0.5, 0.8, 1.2, 1.6, 2.0, 2.5, 3.0, AM 5.0 (MID) 4.0, 5.0, 6.0, 7.0, 8.0 7.0 (SLOW) SSB 0.3 (FAST) 0.1, 0.2, 0.3, 0.5, 0.8, 1.2, 1.6, 2.0, 2.0 (MID) 6.0 (SLOW) 2.5, 3.0, 4.0, 5.0, 6.0 0.1 (FAST) CW 0.5 (MID) 0.1, 0.2, 0.3, 0.5, 0.8, 1.2, 1.6, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0 1.2 (SLOW) 0.1 (FAST) 0.1, 0.2, 0.3, 0.5, 0.8, 1.2, 1.6, 2.0, FSK 0.5 (MID) 2.5, 3.0, 4.0, 5.0, 6.0 1.2 (SLOW) P25 0.1 (FAST) Fixed value. t Push [AGC] to select medium time constant. y Rotate the main dial to set the desired time constant for 'AGC MID.' • AGC time constant can be set between 0.1 to 8.0 sec. (depends on mode) or turned OFF. • Push and hold [F-4•DEF] for 1 sec. to select a default value. u Push [AGC] to select slow time constant. i Rotate the main dial to set the desired time constant for 'AGC SLOW.' • AGC time constant can be set between 0.1 to 8.0 sec. (depends on mode) or turned OFF. • Push and hold [F-4•DEF] for 1 sec. to select a default value. o Select another mode (not FM, WFM or P25). Repeat steps e to i if desired. !0 Push [EXIT/SET] to exit the AGC set mode screen. 5-10