Icom IC-R9500 Instruction Manual - Page 90
Voice set mode
View all Icom IC-R9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
6 VOICE RECORDER FUNCTIONS ■ Voice set mode [F-1•Y] [F-2•Z] [F-4•DEF] [F-7•SET] [EXIT/SET] Main dial Sets the automatic monitor function, short play and normal recording times for voice recorder. q Push [EXIT/SET] several times to close a multifunction screen, if necessary. wPush [F-2•VOICE] to call up the voice recorder screen. e Push [F-7•SET] to enter the voice set mode screen. r Push [F-1•Y] or [F-2•Z] to select the desired item. tRotate main dial to set the desired condition or value. • Push and hold [F-4•DEF] for 1 sec. to select the default condition or value. y Push [EXIT/SET] to exit the voice set mode screen. Short Play Time Set the desired time period for the short play back (when [PLAY] is pushed momentarily). 5s • 3 to 10 sec. in 1 sec. steps can be set. (default: 5 sec.) Short Rec Time Set the desired time period for one-touch recording (when [REC] is pushed momentarily). 15s • 5 to 30 sec. in 1 sec. steps can be set. (default: 15 sec.) Sound Quality (Sampling Rate) Set the recording sound quality. The sampling rate setting is expressed in samples per second, and determines the sound quality. Although a higher sampling rate provides a better quality sound than a lower sampling rate, the file size becomes larger. HQ1(16kHz) • SQ1 (8kHz), SQ2 (12kHz), HQ1 (16KHz), HQ2 (24kHz), SHQ (48kHz) can be set. (default: HQ1(16kHz)) Rec Remote Turns the recording control signal ON or OFF. (default: OFF) OFF • OFF • ON : Continues recording even when received signal disappears or squelch closes. (default) : Records only when received signal appears or squelch opens and stops recording when received signal disappears or squelch closes. 6-6