Icom IC-R9500 Instruction Manual - Page 114
Programming the select memory scan setting, Erasing the select scan setting
View all Icom IC-R9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
8 SCANS D Programming the select memory scan setting q Push [EXIT/SET] several times to close a multifunc- tion screen, if necessary. w Push [F-4•MEMORY] to select memory list screen. e While pushing and holding [F-1•ROLL] or [F-2•SET], rotate the main dial to select the desired memory channel. • [M-CH] (or [BANK]) control and direct keypad selection can be used. r Push and hold [F-3•SELECT] for 1 sec. to display the memory-select window. tRotate the main dial to select the desired select • Memory-select window memory channel group. • ★1 to ★9 are selectable. y Push [F-3•SELECT] to set the select setting ON. • Push [F-3•SELECT] again to select the select setting OFF. u Repeat steps e to y to program another memory channel as a select memory channel, if desired. • If you want to set a same select channel group, skip steps r and t. i Push [EXIT/SET] to exit the memory list screen. D Erasing the select scan setting q Push [EXIT/SET] several times to close a multifunc- tion screen, if necessary. w Push [F-4•MEMORY] to select memory list screen. e Push and hold [F-3•SELECT] for 1 sec. to display memory-select window. rRotate the main dial to select the desired select memory channel group to be erased. t Push and hold [F-2• ALL CLR] for 1 sec. to clear all select scan settings. y Push [EXIT/SET] to exit the memory list screen. 8-12