Icom IC-R9500 Instruction Manual - Page 43

■ Operating mode selection [FM] [WFM] [AM] [SSB/CW] [FSK] [DIGITAL] LSB FM FM WFM WFM AM AM S-AM(D) S-AM(U) S-AM(L) USB SSB/CW CW CW-R FSK FSK FSK-R DIGITAL DIGITAL(P25) Push mode switch momentarily. Push and hold mode switch for 1 sec. 3 BASIC OPERATIONS FM, WFM, AM, Synchronous-AM (S-AM(D)/SAM(U)/S-AM(L)), SSB (USB/LSB), CW, CW reverse (CW-R), FSK, FSK reverse (FSK-R) and DIGITAL (P25*) modes are available in the IC-R9500. Select the desired operation mode as follows. * P25 requires optional UT-122. To select a mode of operation, push the desired mode switch momentarily. Push the switch again to toggle between AM and S-AM(D)/S-AM(U)/S-AM(L), USB and CW/CW-R, if desired. Push and hold the switch for 1 sec. to toggle between S-AM(D), S-AM(U) and SAM(L), USB and LSB, CW and CW-R, FSK and FSKR, if desired. See the diagram below left for the order of selection. • Selecting FM mode ➥ Push [FM] to select FM. • Selecting WFM mode ➥ Push [WFM] to select WFM. • Selecting AM mode ➥ Push [AM] to select AM or S-AM. • After AM or S-AM is selected, push [AM] to toggle between AM and S-AM. • After S-AM is selected, push and hold [AM] for 1 sec. to toggle between S-AM(DSB), S-AM(USB) and SAM(LSB). • Selecting SSB/CW mode ➥ Push [SSB/CW] to select SSB or CW. • After SSB or CW is selected, push [SSB/CW] to toggle between SSB (USB is automatically selected) and CW. • After SSB or CW is selected, push and hold [SSB/CW] for 1 sec. to toggle between USB and LSB, or, CW and CW reverse mode, respectively. • Selecting FSK mode ➥ Push [FSK] to select FSK. • After FSK is selected, push and hold [FSK] for 1 sec. to toggle between FSK and FSK reverse mode. • Selecting DIGITAL mode (Requires optional U-122) ➥ Push [DIGITAL] to select digital (P25) mode. 3-7