Icom IC-R9500 Instruction Manual - Page 173
FM/AM/SSB/CW/FSK; 0=3 kHz
View all Icom IC-R9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
CONTROL COMMAND 13 D Command table (continued) Command 1A Sub command 050235 050236 050237 050238 050239 050240 050241 050242 050243 050244 050245 050246 050247 050248 050249 050250 050251 Description Send/read TS (100 Hz) as selectable tuning step for P25 (0=OFF, 1=ON) Send/read TS (1 kHz) as selectable tuning step for P25 (0=OFF, 1=ON) Send/read TS (2.5 kHz) as selectable tuning step for P25 (0=OFF, 1=ON) Send/read TS (5 Hz) as selectable tuning step for P25 (0=OFF, 1=ON) Send/read TS (6.25 kHz) as selectable tuning step for P25 (0=OFF, 1=ON) Send/read TS (9 kHz) as selectable tuning step for P25 (0=OFF, 1=ON) Send/read TS (10 kHz) as selectable tuning step for P25 (0=OFF, 1=ON) Send/read TS (12.5 kHz) as selectable tuning step for P25 (0=OFF, 1=ON) Send/read TS (20 kHz) as selectable tuning step for P25 (0=OFF, 1=ON) Send/read TS (25 kHz) as selectable tuning step for P25 (0=OFF, 1=ON) Send/read TS (100 kHz) as selectable tuning step for P25 (0=OFF, 1=ON) Send/read TS (1 MHz) as selectable tuning step for P25 (0=OFF, 1=ON) Send/read TS (PROG) as selectable tuning step for P25 (0=OFF, 1=ON) Send/read CW pitch set (0=300 Hz to 120=900 Hz in 5 Hz steps) Send/read FSK RX frequency (0=Mark(Space), 1=Mark/Space Center) Send/read FSK tone frequency (0=1275 Hz, 1=1500 Hz, 2=1615 Hz, 3=2125 Hz) Send/read FSK shift width (0=170 Hz, 1=200 Hz, 2=425 Hz, 3=800 Hz,4=850 Hz ) 08 Send/read DSP filter shape (0= sharp, 1= soft) 09 Send/read roofing filter set (FM/AM/SSB/CW/FSK; 0=3 kHz, 1=6 kHz, 2=15 kHz, 3=50 kHz, WFM; 4=240 kHz, P25; 2=15 kHz) 0A Send/read manual notch1 width (0=Wide, 1=Mid., 2=Nar.) 0B Send/read manual notch2 width (0=Wide, 1=Mid., 2=Nar.) Command 1B 1D Sub command Description 01 Set/read TSQL tone frequency. (see p. 13-10 for details) 02 Set/read DTCS squelch code (see p. 13-10 for details) 03 Set/read NAC squelch code (see p. 13-11 for details) 04 Set/read TGID for selective squelch (see p. 13-11 for details) 05 Set/read UNIT ID for selective squelch (see p. 13-11 for details) 00 Send/read remote function set (0=OFF, 1=REMOTE1 (locks VRs only), 2=REMOTE2 (locks VRs. Keys,and dials) 13-9