Icom IC-R9500 Instruction Manual - Page 96
Memory channel programming
View all Icom IC-R9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
7 MEMORY OPERATION ■ Memory channel programming Memory channel programming can be performed either in VFO mode or in memory mode. D Programming in VFO mode [MW] [BANK] [M-CH] [EXAMPLE]: Programming 7.088 MHz/LSB into mem- ory channel 12. q Set the desired frequency, operating mode and filter width in VFO mode. w Rotate [M-CH] (and [BANK]) to select the desired memory channel. • Memory list screen is convenient for selecting the desired channel. • Memory channel contents appear in the memory channel readout (below the frequency readout appears if the selected memory channel is a blank channel (and does not have contents). e Push and hold [MW] for 1 sec. to program the displayed frequency, operating mode, etc., into the memory channel. Rotate Beep Beep Push for 1 sec. Beep D Programming in memory mode [EXAMPLE]: Programming 21.280 MHz/USB into memory channel 18. Rotate Beep Beep Push for 1 sec. Beep q Select the desired memory channel with [M-CH] in memory mode. • Memory channel contents appear in the memory channel readout (below the frequency readout appears if the selected memory channel is a blank channel (and does not have contents). w Set the desired frequency and operating mode in memory mode. • To program a blank channel, use direct frequency entry with the keypad. e Push and hold [MW] for 1 sec. to program the displayed frequency and operating mode into the memory channel. 7-4