Icom IC-R9500 Instruction Manual - Page 139

SET MODE 11 ■ Others set mode (continued) SPEECH [MODE] SWITCH Selects the operating mode speech capability when a mode switch is pushed; ON or OFF. (default: OFF) When "ON" is selected, the selected operating mode is announced when a mode switch is pushed. OFF REC SPEECH Selects the frequency speech capability when scan stops; ON or OFF. NOTE: Output jacks are selected depending on "SPEECH Mix" settings. See the combination of "REC SPEECH" and "SPEECH Mix" settings in the table below. OFF • ON : The frequency is announced through the [REC OUT]/[LINE OUT] or [SPEECH OUT] when scan stops. • OFF : No speech audio outputs when scan stops. SPEECH Mix Selects the speech audio output from the [REC OUT] or [LINE OUT]. NOTE: See the combination of "REC SPEECH" and "SPEECH Mix" settings below table. All • All : Outputs the speech audio when speech operation is performed from the front panel or depends on above "REC SPEECH" setting. (default) • Operation: Outputs the speech audio when speech operation is performed from the front panel. • OFF : No speech audio outputs from [REC OUT] or [LINE OUT]. • Combination of REC SPEECH and SPEECH Mix settings Switch setting REC SPEECH SPEECH Mix Speech operation from front panel Internal Speaker [REC OUT] / [LINE OUT] [SPEECH OUT] Internal Speaker All ✔ ✔ ✔ - OFF Operation ✔ ✔ ✔ - OFF - - ✔ - All ✔ ✔ ✔ ✔ ON Operation ✔ ✔ ✔ ✔ OFF - - ✔ - Scan stops [REC OUT] / [LINE OUT] [SPEECH OUT] - - - - - - ✔ ✔ - ✔ - ✔ 11-11