Icom IC-R9500 Instruction Manual - Page 97

7 MEMORY OPERATION ■ Frequency transferring D Transferring in VFO mode TRANSFERRING EXAMPLE IN VFO MODE Operating frequency : 21.320 MHz/USB (VFO) Contents of M-ch 16 : 14.018 MHz/CW Rotate Beep Beep Push for 1 sec. Beep The frequency and operating mode in a memory channel can be transferred to the VFO. Frequency transferring can be performed in either VFO mode or memory mode. This is useful for transferring programmed contents to VFO. q Select VFO mode with [VFO]. w Select the memory channel to be transferred with [M-CH] (and [BANK]). • Memory list screen is convenient for selecting the de- sired channel. • Memory channel contents appear in the memory chan- nel readout (below the frequency readout appears if the selected memory channel is a blank channel. In this case transferring is impossible. e Push and hold [M≈V] for 1 sec. to transfer the fre- quency and operating mode. • Transferred frequency and operating mode appear on the frequency readout. D Transferring in memory mode TRANSFERRING EXAMPLE IN MEMORY MODE Operating frequency : 21.320 MHz/USB (M-ch 16) Contents of M-ch 16 : 14.018 MHz/CW Beep Beep Push for 1 sec. Beep Programmed contents appear. This is useful for transferring frequency and operating mode while operating in memory mode. When you have changed the frequency or operating mode in the selected memory channel: • Displayed frequency, mode and filter setting are transferred. • Programmed frequency and mode in the memory channel are not transferred, and they remain in the memory channel. q Select the memory channel to be transferred with [M-CH] (and [BANK]) in memory mode. • And, set the frequency or operating mode if required. w Push and hold [M≈V] for 1 sec. to transfer the frequency and operating mode. • Displayed frequency and operating mode are transferred to the VFO. e To return to VFO mode, push [VFO] momentarily. 7-5