Icom IC-R9500 Instruction Manual - Page 17

1 PANEL DESCRIPTION #3 VFO SWITCH [VFO] Selects the VFO mode when pushed. (p. 3-3) • After pushing a digit switch (0 to 9), push this switch selects a VFO mode (VFO-0 to VFO-9). #4 KEYPAD (pgs. 3-3, 3-4, 7-3) Enters a frequency or memory channel. Pushing [ENT], [VFO] or [MEMO] ends keypad input. • e.g. to enter 14.195 MHz, push [1] [4] [•] [1] [9] [5] [ENT]. #5 ENTER SWITCH [ENT] Enters input frequency. (pgs. 3-4) #6 MEMORY WRITE SWITCH [MW] (p. 7-4) Stores the selected readout frequency and operating mode into the displayed memory channel when pushed and held for 1 sec. • This function is available both in VFO and memory modes. #7 MEMORY CLEAR SWITCH [M-CL] (p. 7-7) Push and hold to clear the contents of displayed memory channel. #8 SPEAKER Outputs audio signals. #9 1/4-SPEED TUNING SWITCH [1/4] ➥ Push to turn the 1⁄4-speed tuning function ON or OFF in CW and FSK modes. (p. 3-6) • " 1⁄4 " appears when 1⁄4 function is in use. • 1⁄4 function sets dial rotation to 1⁄4 of normal speed for fine tuning. ➥ Push and hold to turn the dial click function ON or OFF. (p. 9-3) $0 AFC/AUTOMATIC TUNING SWITCH [AFC•AUTOTUNE] ➥ Turns the AFC function ON or OFF in FM or WFM modes. • " AFC " appears when AFC function is in use. ➥ Turns the automatic tuning function ON or OFF in AM, SSB and CW modes. • " AUTO TUNE " blinks when autotune function is activate. IMPORTANT! When receiving a weak signal, or receiving a signal with interference, the automatic tuning function may tune the receiver to an undesired signal. $1 LCD FUNCTION SWITCHES [F-1]-[F-7] Push to select the function indicated in the LCD display above these switches. • Functions vary depending on the operating condition. $2 MINI SPECTRUM SCOPE SWITCH [M.SCOPE] (p. 5-6) ➥ Turns the mini spectrum scope screen ON or OFF. • The mini spectrum scope screen can be displayed with another screen, such as memory or set mode screen, simultaneously. ➥ Turns the spectrum scope screen ON when pushed and held for 1 sec. $3 MODE SWITCHES Selects the desired mode. (p. 3-7) • Announces selected mode via the speech synthesizer. (p. 11-11) ➥ Selects FM mode. WFM ➥ Selects WFM mode. SSB/CW FSK DIGITAL ➥ Selects AM and S-AM modes alternately. ➥ Switches S-AM(D), S-AM(U) and S- AM(L) mode when pushed and held for 1 sec. in S-AM mode. ➥ Switches between SSB and CW mode. ➥ Switches between LSB and USB mode when pushed and held for 1 sec. in SSB mode. ➥ Switches between CW and CW-R (CW reverse) mode when pushed and held for 1 sec. in CW mode. ➥ Selects FSK and FSK-R (FSK reverse) modes alternately. ➥ Selects Digital (P25) mode. (Requires optional UT-122.) $4 DISPLAY SWITCH [DISPLAY] ➥ Push to toggle the external input screen between mini video screen, full video screen, or OFF. • If no signal inputs from [VIDEO IN], black screen appears. ➥ Enter the display set mode menu screen when pushed and held for 1 sec. 1-7