Icom IC-R9500 Instruction Manual - Page 153
VIDEO, Trimming, Output, VIDEO IN, Horizontal, Setup, Level, Saturation
View all Icom IC-R9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
SET MODE 11 ■ Display set (Video) mode (continued) VIDEO IN Trimming Trims the frame of the video signal from [VIDEO IN] jack. (default: ON) ON OFF : Displays the entire area of video signal. ON : Cuts the frame area (each 4% width of upper, bottom, left and right areas) and expands the rest of area. VIDEO IN Wide (Full) ON Selects the wide screen capability ON and OFF. NOTE: This setting is effective for the full screen only. VIDEO (DATA IN) Output Selects the output video signal from pin 2 of [DATA IN] socket. (default: VIDEO IN) VIDEO IN VIDEO IN : Outputs a video signal that is the same as the input from [VIDEO IN] jack. LCD : Outputs a video signal that is the same as the LCD. VIDEO Out Horizontal Size 1 Adjusts the horizontal width of the output video signal from pin 2 of [DATA IN] socket. Adjustable range is 1 (narrow) to 4 (wide) in 1 steps. (default: 1) VIDEO Out Setup Level Selects the setup level of the output video signal from pin 2 [DATA IN] socket. Selectable items are 0IRE (JPN NTSC) or 7.5IRE (USA NTSC). NOTE: Default setting is different depending on versions. VIDEO Out Saturation Adjusts the saturation (vibrancy of the color) of the output video signal from pin 2 of [DATA IN] jack. Adjustable range is 0 (shade of gray) to 100% (vivid color) in 1% steps. (default: 80%) VIDEO Out Hue Adjusts the hue (color type) of the output video signal from pin 2 of [DATA IN] jack. Adjustable range is 0 (red) to 100 (green) in 1 steps. (default: 50) 7.5IRE 80% 50% 11-25