Icom IC-R9500 Instruction Manual - Page 163

■ Resetting the CPU [POWER] [CE] [M-CL] iR9500 ALL CLEAR MAINTENANCE 12 q Turn the main power switch on the rear panel ON. • Make sure the receiver power is still OFF. w While pushing and holding [CE] and [M-CL], push [POWER] to turn power ON. • The internal CPU is reset. • The CPU start-up takes approx. 5 sec. • The receiver displays its initial VFO frequencies when resetting is complete. e Correct the set mode settings after resetting, if desired. NOTE: Resetting CLEARS all programmed contents in memory channels and returns programmed values in set mode to default values. ■ Screen saver function [F-3•DISP] [F-4•DEF] [F-7•SET]/[F-7•WIDE] [F-1•Y] [F-2•Z] [F-5•PREVIEW] [EXIT/SET] Main dial The IC-R9500 has a screen saver function to protect the LCD from the "burn-in" effect. q Push [EXIT/SET] several times to close a multifunction screen, if necessary. w Push [F-7•SET] to select set mode menu screen. e Push [F-3•DISP] to enter the display set mode. r Push [F-1•Y]/[F-2•Z] several times to select the "Screen Saver Function" item. t Rotate main dial to select the desired time period for the screen saver activation from 15, 30, 60 min. and OFF. • Deactivate the screen saver with "OFF" selection. • Push and hold [F-5•PREVIEW] to display the indication for your reference. y Push [EXIT/SET] twice to exit the set mode. 12-9