Icom IC-R9500 Instruction Manual - Page 169

CONTROL COMMAND 13 D Command table (continued) Command Sub command Description 1A 050042 Send/read P25 received ID pop- up indication setting (0=OFF, 1=ON(Dec), 2=ON(Hex)) 050043 Send/read screen saver set (0=OFF, 1=15 min., 2=30 min., 3=60 min.) 050044 Send/read output signal setting for external display (0=OFF, 1=ON) 050045 Send/read external display syn- chronous pulse level setting (0=L, 1=H) 050046 Send/read opening message indi- cation (0=OFF, 1=ON) 050047 Send/read opening message con- tents (see p. 13-10 for details) 050048 Send/read date (20000101=1st Jan. 2000 to 20991231=31st Dec. 2099) 050049 Send/read time (0000=00:00 to 2359=23:59) 050050 Send/read clock 2 function (0=OFF, 1=ON) 050051 Send/read offset time for clock 2 (240001=-24:00 to 240000=+24:00) 050052 Send/read clock 2 name (Up to 3-character; see p. 13-10) 050053 Send/read calibration marker (0=OFF, 1=ON) 050054 Send/read confirmation beep (0=OFF, 1=ON) 050055 Send/read beep audio frequency (50=500 Hz to 200=2000 Hz) 050056 Send/read panel lock function set (0=ALL, 1=KEY) 050057 Send/read speech language (0=English, 1=Japanese) 050058 Send/read speech speed (0=Slow, 1=Fast) 050059 Send/read S-level speech (0=OFF, 1=ON) 050060 Send/read speech with a mode switch operation (0=OFF, 1=ON) 050061 Send/read REC Speech set (0=OFF, 1=ON) 050062 Send/read Speech Mix function set (0=OFF, 1=Operation, 2=All) 050063 Send/read main dial auto TS (0=OFF, 1=Low, 2=High) 050064 Send/read main dial click function mode set (0=Manual, 1=Auto) 050065 Send/read main dial click function set (When above is Manual; 0=OFF, 1=ON or Auto; 0=OFF, 1=Auto) 050066 Send/read main dial click (set mode, etc) function (0=OFF, 1=ON) 050067 Send/read main dial operation during scan (0=OFF, 1=Up/Down) 050068 Send/read AFC limit set (0=OFF, 1=ON) 050069 Send/read SSB/CW synchronous tuning function (0=OFF, 1=ON) 050070 Send/read CW normal side set (0=LSB, 1=USB) 050071 Send/read APF type (0=SHARP, 1=SOFT) Command 1A 13-5 Sub command Description 050072 050073 050074 050075 050076 050077 050078 050079 050080 050081 050082 050083 050084 050085 050086 050087 050088 050089 050090 050091 050092 050093 Send/read CI-V transceive set (0=OFF, 1=ON) Send/read RS-232C function (0=CI-V, 1=Decode) Send/read RS-232C decode speed (0=300, 1=1200, 2=4800, 3=9600, 4=19200) Send/read keyboard type (00=English, 01=Japanese, 02=United Kingdom, 03=French, 04=French (Canadian), 05=German, 06=Portuguese, 07=Portuguese (Brazilian), 08=Spanish, 09=Spanish (Latin American), 10=Italian) Send/read keyboard repeat delay (10=100 msec. to 100=1000 msec.) Send/read keyboard repeat speed (0=2.0 cps to 31=30.0 cps) Send/read IP address set (0000000000000001=0.0.0.1 to 0255025502550254=255.255.25 5.254) Send/read subnet mask (1=128.0.0.0 to 30=255.255.255.252) Send/read TV type (0=NTSC M, 1=PAL B/G, 2=PAL I, 3=PAL D, 4=SECAM K) Send/read the LCD contrast of the video signal from [VIDEO IN] (0=0% to 255=100%) Send/read the LCD brightness of the video signal from [VIDEO IN] (0=0% to 255=100%) Send/read the saturation of the video signal from [VIDEO IN] (0=0% to 255=100%) Send/read the hue of the video signal from [VIDEO IN] (0=0% to 255=100%) Send/read the frame trimming of the video signal from [VIDEO IN]. (0=OFF, 1=ON) Send/read the wide screen set. (0=OFF, 1=ON) Send/read the output video signal from [DATA IN] (0=VIDEO IN, 1=LCD) Send/read the width of the output video signal from [DATA IN] (0=1 (narrow) to 3=4 (wide)) Send/read setup of the output video signal from [DATA IN] (0=0IRE (JPN NTSC), 1=7.5IRE (USA NTSC)) Send/read output saturation level from [DATA IN] (0=0% to 255=100%) Send/read output hue level from [DATA IN]. (0=0% to 255=100%) Send/read the LCD contrast with dimmer OFF condition (0=0% to 255=100%) Send/read the LCD brightness with dimmer OFF condition (0=0% to 255=100%)