Icom IC-R9500 Instruction Manual - Page 168
Command table continued - 02
View all Icom IC-R9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
13 CONTROL COMMAND D Command table (continued) Command Sub command Description 14 1D + Level data [SCAN SPEED] setting (0=max. CCW to 255=max. CW) 1E + Level data [SCAN DELAY] setting (0=max. CCW to 255=max. CW) 15 01 Read squelch status 02 Read signal (S-meter) level 03+Sign+M-type Read signal (dB meter) level Sign: 0/1=+/-, M-type 0/1/2=dBµ, dBµ[EMF], dBm 04 Read center meter level 16 02 Preamp (0=OFF; 1=preamp 1; 2=preamp 2) 12 AGC selection (0=OFF; 1=Fast; 2=Mid; 3=Slow) 22 Noise blanker (0=OFF, 1=NB1, 2=NB2) 32 Audio peak filter (APF type is SHARP; 0=OFF, 1=320 Hz, 2=160 Hz, 3=80 Hz), (APF type is SOFT; 0=OFF, 1=WIDE, 2=MID, 3=NAR) 40 Noise reduction (0=OFF; 1=ON) 41 Auto notch (0=OFF; 1=ON) 43 Tone squelch (0=OFF; 1=ON) 48 Manual notch1 (0=OFF; 1=ON) 4A AFC (0=OFF; 1=ON) 4B DTCS squelch (0=OFF; 1=ON) 4C VSC (0=OFF; 1=ON) 4D Manual AGC (0=OFF; 1=ON) 4F Twin peak filter (0=OFF; 1=ON) 50 Dial lock (0=OFF; 1=ON) 51 Manual notch2 (0=OFF; 1=ON) 52 P25 Digital squelch (0=OFF; 1=NAC, 2=SEL) 19 00 Read the receiver information 1A 00 Send/read memory contents (see p. 13-10 for details) 03 Send/read the selected filter width (AM: 0=200 Hz to 49=10 kHz; SSB, CW: 0=50 Hz to 40=3600 Hz; FSK: 0=50 Hz to 31=2700 Hz) 04 Send/read the selected AGC time constant (AM: 0=OFF, 1=0.3 sec. to 13=8.0 sec., SSB, CW, FSK: 0=OFF, 1=0.1 sec. to 13=6.0 sec.) 050001 050002 050003 050004 050005 050006 050007 050008 050009 050010 Send/read FM Tone (Bass) level (0=-15 to 30=+15) Send/read FM Tone (Treble) level (0=-15 to 30=+15) Send/read WFM Tone (Bass) level (0=-15 to 30=+15) Send/read WFM Tone (Treble) level (0=-15 to 30=+15) Send/read AM Tone (Bass) level (0=-15 to 30=+15) Send/read AM Tone (Treble) level (0=-15 to 30=+15) Send/read SSB Tone (Bass) level (0=-15 to 30=+15) Send/read SSB Tone (Treble) level (0=-15 to 30=+15) Send/read CW Tone (Bass) level (0=-15 to 30=+15) Send/read CW Tone (Treble) level (0=-15 to 30=+15) Command 1A 13-4 Sub command Description 050011 050012 050013 050014 050015 050016 050017 050018 050019 050020 050021 050022 050023 050024 050025 050026 050027 050028 050029 050030 050031 050032 050033 050034 050035 050036 050037 050038 050039 050040 050041 Send/read FSK Tone (Bass) level (0=-15 to 30=+15) Send/read FSK Tone (Treble) level (0=-15 to 30=+15) Send/read De-emphasis (FM 50k) (0=OFF, 1=ON) Send/read De-emphasis (FM 15k) (0=OFF, 1=ON) Send/read De-emphasis (FM 7k) (0=OFF, 1=ON) Send/read AF high-cut filter (FM 50k) (0=OFF, 1=ON) Send/read AF high-cut filter (FM 15k) (0=OFF, 1=ON) Send/read AF high-cut filter (FM 7k) (0=OFF, 1=ON) Send/read AF high-cut filter (WFM) (0=OFF, 1=ON) Send/read AF high-cut filter (AM) (0=OFF, 1=ON) Send/read AF high-cut filter (SSB) (0=OFF, 1=ON) Send/read AF high-cut filter (CW) (0=OFF, 1=ON) Send/read AF high-cut filter (FSK) (0=OFF, 1=ON) Send/read AF high-cut filter (P25) (0=OFF, 1=ON) Send/read speech level (0=0% to 255=100%) Send/read beep gain (0=0% to 255=100%) Send/read beep gain limit (0=OFF, 1=ON) Send/read headphones output ratio (0=0.60 to 255=1.40) Send/read SPEECH OUTPUT level (0=0% to 255=100%) Send/read S/P DIF output level (0=0% to 255=100%) Send/read REC REMOTE output (0=OFF, 1=ON) Send/read external meter output selection (0=Signal, 1=Signal+SQL) Send/read external meter output level (0=0% to 255=100%) Send/read reference signal in/out setting (0=IN, 1=OFF, 2=OUT) Send/read reference signal frequency setting (0=0% to 255=100%) Send/read screen image type (0=A, 1=B) Send/read signal meter type (0=S, 1=dBµ, 2=dBµ[EMF], 3=dBm Send/read meter peak hold set (0=OFF, 1=ON) Send/read memory name indication setting (0=OFF, 1=ON) Send/read audio peak filter width pop-up indication setting (0=OFF, 1=ON) Send/read manual notch width pop-up indication setting (0=OFF, 1=ON)