Icom IC-R9500 Instruction Manual - Page 138

11 SET MODE ■ Others set mode Calibration Marker This item is used for a simple frequency check of the receiver. (default: OFF) See p. 12-5 for calibration procedure. NOTE: Turn the calibration marker OFF after checking the frequency of the receiver. Beep (Confirmation) A beep sounds each time a switch is pushed to confirm it. This function can be turned OFF for silent operation. (default: ON) The beep output level can be set in level set mode. (p. 11-6) Beep Sound Sets the desired key-touch beep sound frequency from 500 to 2000 Hz in 10 Hz steps. (default: 1000 Hz) OFF ON 1000Hz [PANEL LOCK] SWITCH Selects the Panel lock function activity from "ALL" and "KEY." (default: ALL) ALL ALL : All dials, keys and switches are locked when function ON. KEY : Following controller are active when function ON. [TWIN PBT], [SQUELCH], [AGC], [NOTCH], [NB LEVEL], [NR LEVEL], [AF], [RF], [TREBLE] and [BASS] controls SPEECH Language Selects the speech language from English and Japanese. (default: English) English SPEECH Speed Selects the speech speed from HIGH (faster) and LOW (slower). (default: HIGH) High SPEECH S-Level ON The IC-R9500 speech processor has frequency, mode and signal level announcement. Signal level announcement can be deactivated if desired. (default: ON) When "OFF" is selected, the signal level is not announced. 11-10