Icom IC-R9500 Instruction Manual - Page 115
Select memory scan operation
View all Icom IC-R9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
SCANS 8 D Select memory scan operation [SQUELCH] [EXIT/SET] [SEL] Scan indicator and select memory group number appear Select memory scan allows you to increase scan efficiency by searching for specified channels group only. q Push [EXIT/SET] several times to close a multifunction screen, if necessary. w Set the [SQUELCH] control open or closed. • See page 8-3 for squelch condition. e Push [SEL] to start the select memory scan. • Scan screen appears and memory mode is selected automatically. • " SELECT MEMORY SCAN " and decimal points blink during select memory scan. • Push numeral key (0-9) to change to the other groups. r When the scan detects a signal, the scan stops, pauses or ignores it depending on the resume setting and the squelch condition. t To cancel the scan, push [MEMO]. • Pushing [F5•STOP] also cancels the scan. • Pushing [EXIT/SET] closes the scan screen. 2 or more memory channels must be designated as select memory channels, as well as the same select scan number, for select memory scan to start. ✔ For your convenience Ten select memory scans can be selected directly from the keypad. Then the scan starts immediately. ➥ Push numeral key (0-9) then push [SEL] to start the desired select memory scan. 8-13