Icom IC-R9500 Instruction Manual - Page 136
Display set mode
View all Icom IC-R9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
11 SET MODE ■ Display set mode NOTE: "Display set (Video) mode" is described on page 11-24. Display Type A Selects the desired display type from A and B. (default: A) Signal Meter S Selects the desired signal meter type from "S," "dBµ," "dBµ[EMF]" and "dBm." (default: S) Meter Peak Hold ON Turns the meter peak hold function ON or OFF. (default: ON) This function is used for the bar meter only. Memory Name Sets the memory name indication, during memory mode operation, ON and OFF. (default: ON) ON • ON : The programmed memory name is displayed above the frequency indication. • OFF : No memory name is displayed even a memory name is programmed. APF-Width Popup (APF OFF➞ON) ON Selects the pop-up indication of the APF filter width ON and OFF when the APF function is turned ON. (default: ON) MN-Q Popup (MN OFF➞ON) ON Selects the pop-up indication of the notch filter width ON and OFF when the notch filter is turned ON. (default: ON) P25 RX ID Popup Selects the pop-up indication of the received ID in P25 mode ON and OFF. (default: ON) ON (Dec) • ON (Hex): The received ID code (hexadecimal indication) is displayed when an ID code is received. • ON (Dec): The received ID code (decimal indication) is displayed when an ID code is received. (default) • OFF : No ID code is displayed when an ID code is received. Screen Saver Function Turns the screen saver function ON (15, 30 or 60 min- utes) and OFF. (default: 60 min.) 60min The screen saver will activate when no operation is performed for the selected time period to protect the LCD from "burn-in." 11-8