Icom IC-R9500 Instruction Manual - Page 111
Fine programmed scan/fine, F scan operation
View all Icom IC-R9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
SCANS 8 ■ Fine programmed scan/fine ∂F scan operation In fine scan (programmed or ∂F), the scan speed decreases when the squelch opens, but the receiver keeps scanning. The scanning tuning step shifts from 50 Hz to 10 Hz when the squelch opens. [SQUELCH] [EXIT/SET] [:F] [PROG] [FINE] q Push [EXIT/SET] several times to close a multifunc- tion screen, if necessary. w Push [F-5•SCAN] to select the scan screen. e Set for programmed scan or ∂F scan as described at p.8-6 and p.8-8. r Push [PROG] or [∂F] to start a scan. • " PROGRAM SCAN " or " :F SCAN " and decimal points blink while scanning. t Push [FINE] to start a fine scan. • " FINE PROGRAM SCAN " or " FINE :F SCAN " blinks instead of " PROGRAM SCAN " or " :F SCAN ," respectively. y When the scan detects a signal, the scan speed decreases but scan does not stop. u Push [PROG] or [∂F] to stop the scan; push [FINE] to cancel the fine scan. • Pushing [F5•STOP] also cancels the scan. • Pushing [EXIT/SET] closes the scan screen. i Push and hold [F-6•RECALL] for 1 sec. to recall the frequency that is set before starting the scan, if de- sired. 8-9