Icom IC-R9500 Instruction Manual - Page 70
Peak marker function
View all Icom IC-R9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
5 RECEIVE FUNCTIONS D Peak marker function Multifunction switch [EXIT/SET] [F-7¥PEAK] Peak indicator Peak frequency The peak marker function can display the frequencies of several peaks in order. q Push [EXIT/SET] several times to close a multifunction screen, if necessary. w Push [F-1•SCOPE] to select the scope screen. • The spectrum scope shows the peak level holding function. Peak levels are displayed in the background of the current spectrum in a different color until the receive frequency changes. This can be deactivated and the waveform color can be set in scope set mode. (p. 5-7) e Push [F-6•CENT/FIX] to select center or fixed mode. r Push [F-7•PEAK] once. • Multifunction switch guide changes to the peak selection guide. t Push [PEAK] to place the marker on the first peak. • Push [NEXT level] to search for the next peak level. • Push [NEXTΩ] to search for the next peak level of lower frequency. • Push [NEXT≈] to search for the next peak level of higher frequency. • Push and hold [➔RX] to overwrite the peak level frequency as the new center frequency. • Push [OFF] to turn OFF the maker. • "" appears when the marker is out of range. y Push [EXIT/SET] to return to the previous screen. 5-4