Icom IC-R9500 Instruction Manual - Page 128

10 CLOCK AND TIMERS ■ Setting sleep timer [F-7•SLEEP]/[F-7•SET] [TIMER] [F-4•CLR] [EXIT/SET] Main dial ■ Timer operation [TIMER] [POWER] The sleep timer turns the receiver power OFF automatically after a set period. The timer can be set to 5-120 min. in 5 min. steps. The sleep timer function counts the 'minute' unit, and does not count the 'second' unit. For example, when the sleep timer is started at 12:00 59, first one minute past for just 1 sec. That is way it has max. 59 sec. an error. This is normal, not a malfunction. q Push [EXIT/SET] several times to close a multifunction screen, if necessary. w Push [TIMER] for 1 sec. to select timer set screen. e Push [F-7•SLEEP] to select the sleep timer set con- dition blinks. r Set the desired time period using the main dial. • "TIMER-set Push [SET]" blinks. • Push [F-4•CLR] to select "- - -" to cancel the setting. t Push [F-7•SET] to set the time. • Push [EXIT/SET] to cancel the setting. • The timer indicator above [TIMER] switch lights green. y Push [EXIT/SET] to exit timer set screen. u The receiver emits 10 beeps and turns OFF after the sleep timer period elapses. • The timer indicator blinks while beeping. • Push [TIMER] momentarily to cancel the sleep timer, if desired. q Preset the daily timer as described previously. w Push [TIMER] momentarily to turn the timer function ON. • The timer indicator above this switch lights green when the timer function is ON. e Push and hold [POWER] for 1 sec. to turn the power OFF. • The timer indicator lights continuously. r When the set time arrives, the power is automatically turned ON. t The receiver emits 10 beeps and turns OFF after the power-off period elapses. • The timer indicator blinks while beeping. • Push [TIMER] momentarily to cancel the sleep timer, if desired. The timer action in timer set screen must be turned ON to enable the timer operation, described above "Setting sleep timer" steps r. 10-4