Icom IC-R9500 Instruction Manual - Page 69
Fixed frequency mode
View all Icom IC-R9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
5 RECEIVE FUNCTIONS D Fixed frequency mode Multifunction switch [F-2] [F-6] [F-1] [F-3] [F-5] [EXIT/SET] MENU1 EDGE BW/SPEED ATT MENU2 W-BPF [F-1] [F-2] [F-3] [F-4] HOLD CENT/FIX PEAK SET [F-5] [F-6] [F-7] Displays signals within the specified frequency range. The selected frequency band conditions can be observed at a glance when using this mode. q Push [EXIT/SET] several times to close a multifunction screen, if necessary. w Push [F-1•SCOPE] to select the scope screen. • The spectrum scope shows the peak level holding function. Peak levels are displayed in the background of the current spectrum in a different color until the receive frequency changes. This can be deactivated and the waveform color can be set in scope set mode. (p. 5-7) e Push [F-6•CENT/FIX] to select the fixed mode. • " FIX " is displayed when fix mode is selected. r Push [F-2•EDGE] once. • Multifunction switch guide changes to the resolution band width/speed setting guide. t Push [START] then edit the desired frequency using the keypad to set the lower frequency edge, and push [STOP] then edit the desired frequency using the keypad to set the higher frequency edge. y Push [F-3•BW/SPEED] once. • Multifunction switch guide changes to the resolution band width/speed setting guide. u Push [BW+] or [BW-] several times to select the resolution band width. • 0.2 k, 0.5 k, 1 k, 2 k, 5 k, 10 k and 20 kHz are available depends on the frequency range. i Push [SPEED-] or [SPEED+] several times to select the sweeping speed. o Push [F-4•ATT] several times to activate an attenuator or turn the attenuator OFF. • 10, 20 and 30 dB attenuators are available. !0 Push [F-5•HOLD] to freeze the current spectrum waveform. • " HOLD " appears while the function is in use. • The peak hold function can be deactivated in scope set mode. !1 Push [EXIT/SET] to exit the scope screen. NOTE: If a strong signal is received, a ghost waveform may appear. Push [F-4•ATT] several times to activate the spectrum scope attenuator in this case. 5-3