Icom IC-R9500 Instruction Manual - Page 154

11 SET MODE ■ LCD set mode [F-1•Y] [F-2•Z] [F-4•DEF] [DIMMER] [LCD SET] [EXIT/SET] Main dial • Dimmer function OFF This set mode is used to set the LCD contrast, brightness and other settings for 2 condition of the dimmer function ON and OFF. q Push [LCD SET] to select LCD set mode. w Push [DIMMER] once or twice to select the dimmer function ON or OFF. e Push [F-1•Y] or [F-2•Z] to select the desired set item. r Set the desired condition using the main dial. • Push and hold [F-4•DEF] for 1 sec. to select a default condition or value. • Push and hold [DIMMER] for 3 sec. to reset to a default condition or value for all items at the same time. t Push [DIMMER] once to select the other dimmer setting, and repeat steps e and r. y Push [EXIT/SET] to exit from set mode. • Dimmer function ON Contrast (LCD) Adjusts the contrast of the LCD from 0 (low contrast) to 100% (high contrast) range in 1% steps. 75% Default setting: Dimmer function OFF : 75% Dimmer function ON : 25% Bright (LCD) Adjusts the brightness of the LCD from 0 (dark) to 100% (bright) range in 1% steps. 100% Default setting: Dimmer function OFF : 100% Dimmer function ON : 25% LCD Unit Bright Adjusts the brightness of LCD unit from 0 (dark) to 100% (bright) range in 1% steps. 50% Default setting: Dimmer function OFF : 50% Dimmer function ON : 50% Backlight (Switches) Adjusts the brightness of switch indicators from 1 (dark) to 100 (bright) range in 1 steps. 50% Default setting: Dimmer function OFF : 50% Dimmer function ON : 25% 11-26