Icom IC-R9500 Instruction Manual - Page 119

■ Scan resume condition [DELAY] [OFF] [∞] SCANS 8 Scan pauses when finding a signal, and then resumes or is cancelled depending on the selected scan resume condition. There are 3 resume conditions. • Scan resume OFF Scan pauses until signal disappears, then resumes after 2 sec. ➥ Push [OFF] to set the scan pause timer to OFF. • Scan resume indicator above this switch lights green. Signal no signal receiving a signal no signal Scan scanning pausing scanning 2 sec. • Scan resume ON with specified time period Scan pauses for the adjusted delay period after receiving a signal, then resumes. When the received signal disappears, scan resumes after 2 to 20 sec. ➥ Push [DELAY] to set the scan pause timer to speci- fied time period according to [DELAY] control. (See next page for setting scan delay.) • Scan resume indicator above this switch lights green. • Scan delay time can be set 2 to 20 sec. Signal no signal receiving a signal no signal Scan pausing scanning delay time scanning • Scan cancel Scan is cancelled when a signal is found during scan. ➥ Push [∞] to set the scan pause timer to infinity (scan cancel). • Scan resume indicator above this switch lights green. Signal no signal receiving a signal no signal Scan scanning scan is cancelled 8-17