Icom IC-R9500 Instruction Manual - Page 98

7 MEMORY OPERATION ■ Memory names D Editing (programming) memory names [ABC]/[abc] [123]/[Symbol] Keypad [F-1•Ω] [F-2•≈] [F-3•DEL] [F-4•SPACE] All memory channels (including scan edges) can be tagged with alphanumeric names of up to 10 characters each. Capital letters small letters, '`^+-✱/. numerals some ) [ ] { } s| y_m~b@ols) and spaces can be used. q Push [EXIT/SET] several times to close a multifunction screen, if necessary. w Push [F-4•MEMORY] to select memory list screen. e Select the desired memory channel. r Push [F-4•NAME] to edit memory channel name. • A cursor appears and blinks. • Memory channel names of blank channels cannot be edited. t Input the desired character by rotating the main dial or by editing the keypad for number input. • Push [ABC] or [abc] to toggle capital and small letters. • Push [123] or [Symbol] to toggle numerals and symbols. • Push [F-1•Ω] or [F-2•≈] for cursor movement. • Push [F-3•DEL] to delete the selected character. • Push [F-4•SPACE] to input a space. • Using the receiver's keypad, [0]-[9], can also enter nu- merals. y Push [EXIT/SET] to input and set the name. • The cursor disappears. u Repeat steps e to y to program another memory channel's name, if desired. i Push [EXIT/SET] to exit memory list screen. ■ Memory clearing [M-CL] (CLR) Beep Beep Push for 1 sec. Beep Any unused memory channels can be cleared. The cleared memory channels become blank channels. q Select memory mode with [MEMO]. w Push [F-4•MEMORY] to select memory list screen. e Select the desired memory channel with [M-CH]. r Push and hold [M-CL] for 1 sec. to clear the con- tents. • The programmed frequency and operating mode disap- pear. t To clear other memory channels, repeat steps e and r. 7-6