Icom IC-R9500 Instruction Manual - Page 60

4 RECEIVE MODES D FSK decode set mode [F-1•Y] [F-2•Z] [F-3 F-7•WIDE] [F-4•DEF] [EXIT/SET] Main dial • FSK decode set mode screen This set mode is used to set the decode USOS function, time stamp setting, etc. • Setting contents q During FSK mode operation, push [F-3•DECODE] to select FSK decode screen. w Push [F-1•MENU1] to select FSK decode menu 2, then push [F-6•SET] to select FSK decode set mode. • Push [F-7•WIDE] to toggle the screen size from normal and wide. e Push [F-1•Y] or [F-2•Z] to select the desired set item. r Set the desired condition using the main dial. • Push and hold [F-4•DEF] for 1 sec. to select a default condition or value. • Push [F-3•Ω ≈] to select the set contents for some items. t Push [EXIT/SET] to exit from set mode. FSK FFT Scope Averaging Sets the FFT scope waveform averaging function from 2 to 4 and OFF. (default: OFF) OFF Recommendation! If you use the FFT scope waveform for tuning, use of the default, or smaller number setting is recommended. FSK FFT Scope Waveform Color Sets the color for the FFT scope waveform. • The color is set in RGB format. • The set color is indicated in the box beside the RGB scale. 51 153 255 • Push [F-3•Ω ≈] to select R (Red), G (Green) and B (Blue), and then rotate the main dial to set the ratio from 0 to 255. FSK Decode USOS Turns letter code decoding after receiving a "space" (USOS; UnShift On Space function) capability ON and OFF. ON • ON : Decode as letter code. • OFF : Decode as character code. FSK Decode New Line Code Selects the new line code of the internal FSK decoder. CR: Carriage Return, LF: Line Feed CR,LF,CR+LF • CR,LF,CR;LF : Makes new line with any codes. • CR+LF : Makes new line with CR+LF code only. 4-14